Scooter Repair Coventry
There are a number of simple things that can be checked to keep your scooter running well.
Make sure you have the correct pressure, and that they are in good condition, no cracks, not bald, no flat spots. Also getting the wheels balanced is a good idea. If can afford a good set of tyres, buy them. They are the only thing keeping you up-right, and off the tarmac, don’t buy poor quality tyres. Good tyres will make you faster around the corners, and safer in the wet.
Stopping is pretty important, and unfortunately the braking system is often poorly maintained. Make sure that the discs aren’t warped or scored. If you notice pulsing, grapping or uneven braking then it is a good bet that the disc is to blame. The brake pads don’t really require much in the way of maintenance, but do keep an eye on them; they wear out and need to be replaced. However as with tyres - don’t always purchase the cheapest set, get good quality brake pads from a quality manufacturer. Brake fluid is vital for good braking performance. And should be replaced as part of a good maintenance plan.
You should check the level, which is located on the reservoir, this is mounted next to the brake lever on the handlebars. On most models there is a window to see the fluid level. Make sure the scooter is on a level surface, and check that the fluid falls within the indicated range. If it is not then you need to gain access to the reservoir and carefully add more brake fluid. Don’t spill any on the paint work as it will destroy it!
This is the life-blood of the your scooter, in fact any motor. In a two-stroke engine you have to make sure the reservoir is full with 2-stroke oil. Not all oils are created equal, so get good oil, really good oil, your engine will love you for it and you give you many years of trouble free scootering.
Most modern scooters feature continuously variable transmission’s, commonly referred to as a CVT. It turns out that Leonardo Da Vinci conceptualized this system more than 500 years ago. There are a few parts that may require maintenance within a CVT transmission. One item is the belt, which drives the rear wheel. When new the belt is certain width, but as you ride around wear and tear cause the belt to become thinner. This wear reduces the top speed of the scooter. Therefore if you notice that ...